MELBOURNE APPLIANCE REPAIR SERVICE

Oven Not Heating? Electric Oven Repairs in Melbourne

An oven that stays cold, heats on some functions but not others, takes far too long to get hot or stops in the middle of cooking. We find the cause, tell you the cost first and repair it, with a 12-month warranty on every job.

$199 + GST call-out — includes the first 30 minutes of labour and diagnostics

Updated by the SOS Appliance Melbourne team

Send the appliance brand, model number, symptoms and any displayed error code so we can help clarify the appropriate next step.

✓ Melbourne-based service ✓ Brand and model guidance ✓ Clear repair-first information
Oven repair Melbourne
LOCAL BASE Thomastown Northern Melbourne

Why is my oven not heating?

Quick answer: when an electric oven won’t heat, the cause is usually a failed bake, grill or fan element, a fan motor fault, a faulty thermostat or temperature sensor, a tripped thermal cut-out, a worn selector switch or an overheated wiring connection. Before you book, check the simple things: that the clock has been set after a power cut, that no timer is running, and that demo mode and the child lock are switched off. Any of these can stop an oven heating even though nothing has failed. If it still won’t heat, the oven needs a diagnosis.

An oven that won’t heat may stay completely cold, heat on the grill but not on bake or fan-forced, take far too long to reach temperature, or stop heating in the middle of cooking. We find which part has failed before replacing anything.

We repair built-in wall ovens, freestanding cookers and upright cookers with electric ovens across Melbourne’s north and north-east from our base in Thomastown. Our call-out is $199 + GST and includes the first 30 minutes of labour and diagnostics, parts are quoted before any further work, and every job carries a 12-month warranty.

Which functions still heat?

Most electric ovens have separate elements for the grill, the bake (bottom) heat and the fan-forced heat, so the functions that still work are the best clue to the fault. Try each one for a few minutes and note which heat up:

  • Nothing heats, but the display and light work: check the clock, timer, demo mode and child lock first. If they are fine, a tripped thermal cut-out, the selector switch, the wiring or the control board is likely.
  • The grill heats, but bake or fan-forced doesn’t: the bake element, the fan element or the fan motor, or the switch or control that turns them on.
  • Fan-forced is cold or slow, but conventional bake works: usually the fan element or the fan motor. If the fan doesn’t turn, or grinds, the motor is the more likely cause.
  • It heats, but slowly or not to the set temperature: one element out of two, a faulty thermostat or temperature sensor, or a worn door seal letting heat escape.
  • It heats, then stops part-way through cooking: the thermal cut-out may be tripping because something is overheating, or a connection is failing as it warms up. Stop using the oven if you notice a burning smell.
  • Nothing works at all, including the display: check whether the circuit breaker or safety switch at the switchboard has tripped.

What can I check myself before booking?

  • The clock. On many ovens the heating won’t start until the time of day has been set, for example after the power has been off. Westinghouse says ovens with a programmable timer need the time of day set before they will operate.
  • Timers. A cooking duration or delayed start that is still set can stop the oven heating until it is cleared. Your user manual shows how to cancel it.
  • Demo mode. Ovens have a showroom or demo mode for stores. When it is on, the controls, light and fan work, but the oven doesn’t heat. See the next section.
  • Child lock. Check the key or lock symbol isn’t showing on the display.
  • The function selected. Make sure a heating function is selected, not just the light or defrost, and that a temperature is set.
  • The switchboard. If the circuit breaker or safety switch has tripped, you can reset it once. If it trips again when the oven is used, leave it off and book a repair.

Don’t remove the back panel, the elements or the control panel yourself. These parts carry mains power, and an oven that has overheated inside may have damaged wiring.

Demo mode, the clock and error codes

An oven that “won’t heat” sometimes has nothing wrong with it: it is in demo mode, or it is waiting for the clock to be set. Checking these first can save you a call-out.

Miele oven not heating: demo mode

Miele says that when demo mode is activated, the oven can be operated but does not heat up. On ovens with a display, demo mode is switched off in the settings menu, under the dealer or showroom settings; the exact steps depend on the model, so follow the operating instructions for yours. Miele also notes that a power cut can stop a cooking program, and that switching the oven off and on again usually clears it.

Some Miele codes are about heating too. For example, F55 means the oven has run for an unusually long time and switched itself off for safety. See our Miele oven error codes for others. We are an Authorised Miele Service Agent and fit genuine Miele parts.

Westinghouse, Electrolux and AEG ovens: clock and demo mode

On many Westinghouse, Electrolux and AEG ovens, the clock flashes after the power has been off, and the oven won’t heat until the time of day is set. AEG also says demo mode can come on after a power failure, so if “Demo” or a similar message shows on the display after a power cut, switch it off as your manual describes.

Bosch and other brands

Bosch ovens and many other brands also have a demo mode in their basic settings, and on some models it can only be switched off within a few minutes of the power being restored. If your oven shows an error code instead, note the full code and the model number. See our Bosch oven error codes and the oven error code guide.

Common causes of an oven not heating

Failed element

Elements are the most common failed part in an oven that won’t heat. A failed element may look normal, or show a blister, crack or burnt spot. An element that has broken down to earth can also trip the safety switch as soon as the oven is turned on. We test each element before replacing it, because a switch or control fault can look the same from the outside.

Fan motor and fan element

On fan-forced cooking, a ring element around the fan heats the air and the fan moves it around the oven. If the fan element fails the oven stays cool on fan-forced; if the fan motor fails, the oven may heat unevenly, take a long time or make a grinding noise. We check the motor, the element and the control that switches them before recommending a part.

Thermostat or temperature sensor

Older ovens use a thermostat with a capillary bulb inside the oven; newer ones use a temperature sensor read by the control board. If either fails, the oven may not heat at all, heat too slowly, or not reach the temperature it shows. We measure the oven’s actual temperature and test the sensor before replacing it.

Thermal cut-out, selector switch and wiring

The thermal cut-out is a safety device that cuts the heating if the oven overheats. When it trips, the oven goes cold, sometimes in the middle of cooking. A cut-out that has tripped usually means something else caused the heat, such as a failing cooling fan or a poor wiring connection, so we look for the cause, not just the cut-out.

In Templestowe Lower, a Smeg freestanding cooker stopped heating in the middle of cooking. We found a faulty wiring connection had caused heat build-up inside the oven, which had damaged the selector switch, the fan element control unit and the thermal cut-out. We repaired the wiring connection, supplied and replaced all three parts, and tested the oven: everything worked properly. Read the Smeg oven repair in Templestowe Lower.

Smeg oven in Templestowe Lower opened up to inspect the internal wiring and components
The Smeg cooker in Templestowe Lower, opened up to inspect the wiring and components.

Control board and touch controls

On newer ovens, the control board switches the elements and the fan through relays. A failed relay or board can leave the display working while nothing heats. Before replacing a board, we rule out the settings above and test the elements, sensor and wiring, because a board is one of the more expensive oven parts.

When should I stop using the oven?

Switch the oven off at the wall or the circuit breaker and don’t use it until it has been checked if there is a burning or electrical smell, smoke, sparking, the safety switch keeps tripping, or the oven overheats. Don’t keep resetting the safety switch, and don’t force a door that is locked after a pyrolytic clean.

Which oven brands do we repair?

How much does it cost to fix an oven that won’t heat?

The $199 + GST call-out covers the visit and the first 30 minutes of labour and diagnostics. Finding the fault, and clearing a setting such as demo mode or a timer, is often done within that time. If an element, fan motor, thermostat, sensor, cut-out, switch or board needs replacing, we tell you what has failed and what the repair costs before any further work goes ahead. If the part has to be ordered, we arrange a return visit.

See our full oven repair service for other faults, such as an oven tripping the power, a noisy fan or a door that won’t close. We also repair gas, electric and induction cooktops and rangehoods.

Book an oven repair in Melbourne

Have the brand, model number and any error code ready, and tell us which functions still heat and whether the oven cuts out or trips the power. We repair ovens in Thomastown, Lalor, Epping, South Morang, Mill Park, Whittlesea, Bundoora, Reservoir, Preston, Greensborough, Doncaster, Templestowe and across northern Melbourne. Send a repair request or call 0451 551 053.

HOW A REPAIR WORKS

From booking to a working oven

We test before we replace anything, and you know the cost before any work beyond the call-out goes ahead.

01

Book

Book online or call 0451 551 053 with the brand, model number and any error code.

02

Diagnosis

A technician tests the appliance and finds the cause. The $199 + GST call-out includes the first 30 minutes.

03

Quote and repair

We explain the fault and the cost before any further work, then repair and test the appliance.

FREQUENTLY ASKED QUESTIONS

Oven not heating: your questions

Practical information to help you describe the fault and decide when the appliance should be switched off.

Why is my oven not heating up?

On an electric oven the most common causes are a failed bake, grill or fan element, a fan motor fault, a faulty thermostat or temperature sensor, a tripped thermal cut-out, a worn selector switch or an overheated wiring connection. Before booking, check the clock is set, no timer is running, and demo mode and the child lock are off, because any of these can stop the oven heating.

Why is my oven light and fan on but the oven isn’t heating?

First check demo mode and the clock. Miele says that in demo mode the oven can be operated but does not heat up, and many ovens won’t heat until the time of day is set after a power cut. If both are fine, the usual causes are a failed element, a tripped thermal cut-out or a fault in the switch or control that turns the heating on.

Why does my grill work but my oven won’t heat?

The grill has its own element, so if the grill heats but bake or fan-forced doesn’t, the fault is usually in the parts only those functions use: the bake element, the fan element, the fan motor, or the selector switch or control that switches them on. Tell us which functions still heat when you book, because it narrows the fault down quickly.

How do I reset my oven?

Most ovens don’t have a reset button. Switch the oven off at the wall or the circuit breaker for a minute or so, switch it back on, then set the clock and check that demo mode and the child lock are off. If the safety switch trips again when the oven comes on, leave it off and book a repair rather than resetting it again.

How do I know if my oven element has gone?

A failed element often stops one function heating while the others still work, for example fan-forced stays cold but the grill heats. Sometimes you can see a break, blister or burnt spot on it, or it trips the safety switch when the oven turns on. A technician confirms it by testing the element, because a switch, fan or control fault can look the same. Don’t take the back panel off yourself.

Why is my oven taking so long to heat up?

An oven that heats but takes much longer than usual often has one element out of two working, a fan motor that is slow or stopped, a faulty thermostat or temperature sensor, or a worn door seal letting heat escape. If food is also cooking unevenly or the oven never reaches the temperature you set, book a diagnosis.

Why did my oven stop heating in the middle of cooking?

A tripped thermal cut-out, a failed element or a wiring fault are common causes. In Templestowe Lower, a Smeg cooker stopped heating mid-cook because a faulty wiring connection had overheated and damaged the selector switch, the fan element control unit and the thermal cut-out. We repaired the wiring and replaced all three parts. If you notice a burning smell, switch the oven off at the wall or circuit breaker.

Why does my oven trip the power when I turn it on?

The most common cause is an element that has broken down to earth, but damaged wiring, a fan motor fault or moisture inside the oven can also trip the safety switch. Leave the oven switched off at the switchboard and don’t keep resetting the safety switch. We find which part is causing the trip and replace it.

Is it worth repairing an oven that won’t heat?

Often it is, because the fault is usually one part, such as an element, fan motor, thermostat, cut-out or switch. After the diagnosis we tell you what has failed and what the repair costs before any further work, so you can weigh it against replacing the oven. A control board is one of the more expensive parts, so we rule out everything else first.

How much does it cost to fix an oven that won’t heat?

Our call-out is $199 + GST and includes the first 30 minutes of labour and diagnostics. Clearing a setting such as demo mode is often done in that time. If a part needs replacing, we tell you what has failed and the cost before any further work goes ahead. Every repair comes with a 12-month warranty. We are an Authorised Miele Service Agent and also repair Bosch, Smeg, Westinghouse and most other electric ovens.

BOOK AN APPLIANCE REPAIR

Need help with your oven?

Send the brand, model number and fault symptoms.

WhatsApp